UV Resin 30ml - Toxic Effect

Green Stuff World

UV Resin 30ml - Toxic Effect- 2094 -Green Stuff World

1 Review
£8.40

UV Resin 30ml - Toxic Effect- 2094 -Green Stuff World

 **IMPORTANT PLEASE READ**

Thank you for your purchase of Green Stuff World paint. The nozzles of the paint Could come without drilling to protect the paint, please check the nozzles and drill them on the first use. Please do not squeeze the paint if you feel resistance, this is highly likely to result in the paint lid dislodging and the paint spilling. 

 

GSW offers a brand new alternative for artists and modellers seeking to create toxic waste effects with this Ultraviolet Resin. Composed with Lime Fluor, this product has the same properties as our Water Effect but has a radioactive green colour, perfect for creating fluorescent toxic substances or nuclear waste. Can be used by itself or with normal transparent UV Resin.

A one-stepgel, squeeze this product straight from the bottle onto your diorama or miniature.

Ultrafast drying gel. This product can be combined with a UV Torch (available HERE) to dry in 2-4 minutes. On a sunny day, the gel has a drying time of 5-10 minutes. On a cloudy day, 20-40 minutes.

Doesn't shrink. The UV Resin doesn't shrink. The quantity of resin used is the quantity of resin you get when fully dried.

Multilayer friendly. In case you want to create the effect of submerging something, multiple layers can be placed on top of each other without leaving layer marks.

Can be cut, polished and worked easily. The resin is easy to manipulate and can be shaped and carved however you want!

Contains: 30ml

* When the resin is in its non-solid state you can use a heat gun or a kitchen lighter to heat the resin and force out any air bubbles that may have gotten caught in it.

* Keep in mind that the resin will remain in its gel state indefinitely until a source of natural light or ultraviolet light comes into contact with it.

* Do not expose the inside of the bottle to natural light, otherwise the gel could start a reaction and crystallize.

UV resin warnings

- Environmental conditions can affect the properties of the material

- Use in a dry, ventilated place and at a temperature between 18 ° C and 25 ° C is recommended. Extreme cold and heat can damage the material.

- Use under inadequate conditions, inadequate exposure to UV light or insufficient UV light output can result in the surface feeling tacky after curing. In this case, we recommend applying more UV light or gloss varnish.

- GSW recommend consuming the product within 10 months. The shelf life of the product may decrease after opening depending on the state of preservation, exposure to UV light and low temperatures.

 

 

 

**Any scenery, miniatures or bases shown are for example only.**



More from this collection